Before you buy any attachment, look at the front and the top of your mixer. KitchenAid, Hamilton Beach Professional and Bosch do not attach things the same way, and the part that fits one may be useless on another. Most guides skip this because they only cover KitchenAid.
This page is sorted by mixer. We start with an attachment whose listing names two brands, then cover KitchenAid’s hub, then the Bosch and NutriMill family. Every pick states what it fits, and we tell you where the fit comes from.
Julia’s earns a commission on purchases made through links on this page, at no cost to you. Recommendations are based on what a restaurant kitchen looks for, product specifications and verified buyer reports.
Quick verdict: which attachment fits your mixer
For a Hamilton Beach Professional, or a KitchenAid if you accept a non-KitchenAid part, start with the Hamilton Beach Professional Slicer and Shredder Set. KitchenAid owners who want the same maker should look at the KitchenAid Rotor Slicer and Shredder. Bosch and Artiste owners get the most new work from the NutriMill Spiralizer or NutriMill Ice Cream Maker Attachment.
If you own only a KitchenAid and want a deeper look at that one brand, read our KitchenAid attachments guide. None of the seven picks here repeat its picks.
Five stand mixer attachments at a glance
Five standout picks side by side, one for each kind of owner, with the fit each listing states. All seven are reviewed in full below.
| Attachment | Best for | Job | Mixer fit | Buy on Amazon |
|---|---|---|---|---|
| Cheese and cabbage | Slice, shred | Hamilton Beach Professional; KitchenAid per listing | View on Amazon | |
KitchenAid Vegetable Sheet Cutter With Noodle BladeBest for KitchenAid hubs
|
KitchenAid owners | Sheets and noodles | All household KitchenAid | View on Amazon |
KitchenAid Flex Edge BeaterBest for bakers
|
Tilt-head bakers | Scrape while mixing | 4.5 and 5 quart tilt-head KitchenAid | View on Amazon |
NutriMill Spiralizer for Bosch and Artiste MixersBest for Bosch mixers
|
Bosch owners | Spiralize, ribbon | Bosch Universal Plus, NutriMill Artiste | View on Amazon |
NutriMill Ice Cream Maker AttachmentBest for frozen desserts
|
Frozen desserts | Churn 1.5 quarts | Bosch Universal Plus, NutriMill Artiste | View on Amazon |
Product images from Amazon. Fit is as stated by each maker or listing, so confirm your mixer model before you buy.
Our picks for the best stand mixer attachments
The seven picks run from the widest stated fit to the most specific. Each section says what the attachment does, which mixer it needs and where it falls short.
1. Hamilton Beach Professional Slicer and Shredder Set – One Attachment, Two Stated Hubs
This set turns a mixer into a slicing and shredding machine, and it is the one pick here whose listing names two kinds of mixer. Hamilton Beach built it for its Professional stand mixer, then states that it is also compatible with KitchenAid stand mixers. For a kitchen that may change mixers later, that is worth something.
It comes with three stainless steel blades: a 3 mm slicing blade, a 4 mm medium shredding blade and a 6 mm coarse shredding blade. That covers the jobs a taco night throws at you. Coarse for a block of Monterey Jack, medium for carrots and cabbage, and the thin slice for tomatoes or peppers.
Hamilton Beach backs it with a five-year limited warranty, the longest stated on this page. One caution: the lead offer came from a third-party seller when we checked, not from Amazon itself, so confirm that the warranty applies to your purchase. The KitchenAid fit is the maker’s claim, not KitchenAid’s.
Why we like it
- Listing names both Hamilton Beach Professional and KitchenAid mixers
- Three stainless steel blades with stated sizes
- Five-year limited warranty
- Covers the two prep jobs home cooks repeat most
Key specifications
| Model | 63247 |
|---|---|
| Mixer fit | Hamilton Beach Professional; KitchenAid per Hamilton Beach |
| Job | Slice, shred |
| Included | 3 mm slicer, 4 mm and 6 mm shredders |
| Material | Stainless steel blades |
| Cleaning | Soap and water |
| Warranty | 5 years, limited |
Why we recommend it
This is the first attachment we would look at if you shred cheese and vegetables every week. It suits Hamilton Beach Professional owners first, and KitchenAid owners who are comfortable with a non-KitchenAid part.
Skip it if you own the small Hamilton Beach 4-quart mixer on our stand mixer guide. This listing names the Professional stand mixer, not that model.
Pros and cons
Pros
- Stated fit across two brands
- Longest stated warranty here
- Clear blade sizes
Cons
- Third-party seller at last check
- No dishwasher statement
- KitchenAid fit comes from Hamilton Beach
2. KitchenAid Vegetable Sheet Cutter With Noodle Blade – Sheets and Noodles on the Hub
KitchenAid says this one connects to any household KitchenAid stand mixer hub and uses the mixer’s motor to do the work. A vegetable turns on a skewer against the blade and comes off as a long, wide sheet. The thin and thick blades set the sheet thickness, and this version adds a noodle blade.
That third blade is the reason it is on this page. Our KitchenAid attachments guide covers the plain sheet cutter, and our spiralizer guide covers dedicated spiralizers. This one sits between them, giving you sheets for a layered enchilada bake and noodles for a quick side from one case.
It also includes a zucchini and cucumber adapter, a food holder and a skewer, all in a storage case. KitchenAid calls the build metal and says that adds stability on the mixer. The blades and small parts go on the top rack of the dishwasher, and the body wipes clean with a warm, damp cloth.
Why we like it
- Listing states fit on any household KitchenAid hub
- Thin, thick and noodle blades
- Own storage case
- Blades and small parts are top-rack safe
Key specifications
| Model | KSM2SCA |
|---|---|
| Mixer fit | All household KitchenAid stand mixers |
| Job | Cut sheets and noodles |
| Included | Three blades, adapter, food holder, skewer, case |
| Material | Metal body |
| Cleaning | Top rack for blades and small parts; wipe the body |
| Warranty | 1 year |
Why we recommend it
This suits KitchenAid owners who eat a lot of vegetables and want an attachment that does something a knife cannot do quickly. It is a good second attachment after a slicer.
Skip it if you only want shredded cheese or sliced onions. The rotor slicer below or the Hamilton Beach set will see far more use.
Pros and cons
Pros
- Fits every household KitchenAid hub, per the listing
- Two cuts in one purchase
- Tidy storage
Cons
- Narrower use than a slicer
- Body is wipe-only
- Works best on the produce it is built for
3. KitchenAid Rotor Slicer and Shredder – Four Cones for Everyday Prep
This is KitchenAid’s rotor-style slicer, sold as fitting all household KitchenAid stand mixers. It uses cones rather than flat discs: two shredding cones for fine or coarse work, and two slicing cones for thick or thin slices. You feed food in, and the cone spins in front of the hub.
That is four cuts, one more than the Hamilton Beach set, and it comes from the maker of the hub. If you would rather not wonder about third-party fit, this is the simple answer. It suits blocks of cheese for enchiladas, cabbage for tacos and potatoes for a gratin.
The listing is short. It does not state the material or the cleaning method, so we list both as not stated. As with the Hamilton Beach set, the lead offer came from a third-party seller when we checked. KitchenAid also sells a different slicer, which we cover in the KitchenAid attachments guide.
Why we like it
- Made by the maker of the hub
- Two shredding cones and two slicing cones
- Listing states fit on household mixers
- Front pocket on the case, per the listing
Key specifications
| Model | RVSA |
|---|---|
| Mixer fit | All household KitchenAid stand mixers |
| Job | Slice, shred |
| Included | 2 shredding cones, 2 slicing cones |
| Material | Not stated |
| Cleaning | Not stated |
| Warranty | 1 year |
Why we recommend it
Choose this if you own a KitchenAid and want a basic slicer from the same maker. It is the plainest route to shredded cheese and sliced vegetables on that hub.
Skip it if you want adjustable thickness without swapping parts. Each thickness here is its own cone, so there are more pieces to store.
Pros and cons
Pros
- Four cuts
- Same maker as the hub
- Simple to understand
Cons
- Third-party seller at last check
- Sparse listing
- Cones to store and swap
4. KitchenAid Flex Edge Beater – Scrapes the Bowl as It Mixes
Not every attachment goes on the hub. This one replaces the flat beater on the mixer’s beater shaft, so it matters what head and bowl you own. The listing limits it to 4.5 and 5 quart tilt-head mixers, and it names model families: K45SS, KSM1, KSM100, KSM110, KSM120, KSM15, KSM16, KSM75, KSM8 and KSM9.
The flexible edge scrapes ingredients into the bowl while the beater turns. KitchenAid says that reduces mixing time. In practice, the benefit is fewer stops to clean down the sides when you are making cookie dough, frosting or the sweet batter for a tres leches cake.
It is dishwasher safe, which is a plus for an everyday tool. Because it fits only tilt-head bowls, owners of bowl-lift machines should not buy this one. Check the first letters of your model number against the list above before ordering.
Why we like it
- Listing names the model families it fits
- Flexible edge scrapes as it turns
- Dishwasher safe
- No hub or storage case needed
Key specifications
| Model | KFE5T |
|---|---|
| Mixer fit | 4.5 and 5 quart tilt-head KitchenAid |
| Job | Scrape while mixing |
| Included | 1 beater |
| Material | Flexible silicone scraper edge |
| Cleaning | Dishwasher safe |
| Warranty | 1 year |
Why we recommend it
This is the pick for people who bake often and tire of stopping the mixer with a spatula in hand. It changes a daily routine more than a specialty attachment does.
Skip it if you own a bowl-lift mixer or mostly knead bread. The listing limits it to tilt-head bowls, and a flat beater is not a dough tool.
Pros and cons
Pros
- Fewer stops to scrape
- Stated model list
- Easy to clean
Cons
- Tilt-head only
- Replaces your beater for one job only
- Not a hub attachment
5. NutriMill Spiralizer for Bosch and Artiste Mixers – Noodles Without a KitchenAid
If your mixer is a Bosch Universal, the KitchenAid hub does not apply to you. NutriMill sells this spiralizer for its own Artiste mixer and for the Bosch Universal Plus. NutriMill’s guide also lists the Universal Classic, so the guide goes further than the listing. It sits on the mixer bowl and locks in place.
You get three blades. NutriMill describes a thick spiral blade for wide strands, a thin spiral blade for spaghetti-like noodles, and a straight edge blade for ribbons or thin slices. Place the vegetable on the holder, then use the pusher while the mixer runs.
NutriMill gives speed guidance by mixer: speeds 1 to 2 for soft vegetables such as zucchini, and speeds 3 to 4 for firmer ones such as carrots or potatoes. Its guide calls the attachment dishwasher safe, with the top rack recommended, and suggests drying parts promptly. Our stand mixer guide has more on the Bosch itself.
Why we like it
- Listing states Bosch Universal Plus and Artiste fit
- Three blades, including one for ribbons
- Maker publishes speeds for each mixer
- Top-rack dishwasher safe, per NutriMill
Key specifications
| Model | MUZ6SP1 |
|---|---|
| Mixer fit | Bosch Universal Plus, NutriMill Artiste; NutriMill’s guide adds Universal Classic |
| Job | Spiralize, ribbon |
| Included | Spiralizer, 3 blades, pusher |
| Material | Not stated |
| Cleaning | Top rack recommended |
| Warranty | Not stated |
Why we recommend it
This suits Bosch and Artiste owners who want vegetable noodles from the machine they already have. Soft zucchini and firm carrots both have stated speed settings, which removes some guesswork.
Skip it if you own a KitchenAid or a Cuisinart. It sits on the Bosch-style bowl, and neither listing nor guide names other mixers.
Pros and cons
Pros
- Real option for a non-KitchenAid mixer
- Clear speed advice
- Ribbon blade adds variety
Cons
- Fit list differs slightly between listing and guide
- Warranty not stated
- Single-purpose tool
6. NutriMill Ice Cream Maker Attachment – Uses Ice, No Frozen Bowl
Most stand mixer ice cream attachments need a bowl frozen ahead of time. This one does not. NutriMill’s guide has you set the attachment inside the mixer bowl, surround the stainless steel bowl with alternating layers of ice and rock salt, pour in your mix, then fit the paddle and lid.
The listing gives 1.5 quarts as the size. NutriMill’s guide says to run the mixer at speed 2 to 3 for about 20 to 30 minutes and leave room for the mix to expand. Foodal’s Nikki Cervone also reports it can freeze ice cream in less than 30 minutes, and that it mounts on the mixer’s center driveshaft.
Because you are not waiting on a frozen bowl, a second batch can follow the first. That is useful for a party with both vanilla and a mango or horchata base. The listing is clear that this fits the Bosch Universal Plus and the NutriMill Artiste, and not the original Bosch Universal. For other routes to homemade ice cream, see our ice cream maker guide.
Why we like it
- No bowl to freeze overnight
- 1.5 quart size stated
- Clear fit limits in the listing
- Top-rack dishwasher safe, per NutriMill
Key specifications
| Model | MUZ6IC1 |
|---|---|
| Mixer fit | Bosch Universal Plus, NutriMill Artiste; not the original Universal |
| Job | Churn ice cream |
| Included | Attachment with stainless bowl |
| Material | Stainless steel bowl |
| Cleaning | Top rack recommended; dry by hand |
| Warranty | Not stated |
Why we recommend it
Pick this if you own one of the two named mixers and like making ice cream on impulse. Keeping ice and rock salt on hand is simpler than giving up freezer space to a bowl.
Skip it if you own the original Bosch Universal or if hauling ice and salt sounds like a chore. A compressor machine avoids both.
Pros and cons
Pros
- Churns without pre-freezing
- Back-to-back batches are practical
- Plain instructions from the maker
Cons
- Needs ice and rock salt
- Narrow mixer fit
- Occupies the mixer for up to 30 minutes
7. NutriMill Bowl Scraper Attachment – The Bosch Answer to a Flex Beater
Bosch owners have the same bowl-scraping chore as anyone else, and this is the answer. The scraper fits over the whips, whisks and cookie paddles, and turns with them to clear the sides of the bowl. NutriMill’s attachment resources describe it as working on the whip drive, paired with paddles or whips.
The package includes two sets of blades and a blade drive. The listing body says it fits Bosch Universal and Universal Plus mixers, and the title adds the Artiste. It states that the parts are BPA free and FDA compliant, which we report as the listing’s wording only.
This is not an attachment that opens up a new job. It makes the mixer’s main job easier, the same way the Flex Edge Beater does on a KitchenAid. For frosting, cake batter and egg whites, that is often worth more than a gadget that stays in a cabinet. It will not help with kneading, since it works with paddles and whips and not a dough hook.
Why we like it
- Works with whips, whisks and cookie paddles
- Two sets of blades included
- Fit stated for Bosch mixers
- Sold by NutriMill itself when we checked
Key specifications
| Model | MUZ6BS1 |
|---|---|
| Mixer fit | Bosch Universal, Universal Plus; title adds Artiste |
| Job | Scrape while mixing |
| Included | 2 blade sets, blade drive |
| Material | BPA free plastic, per listing |
| Cleaning | Not stated |
| Warranty | Not stated |
Why we recommend it
This suits Bosch and Artiste owners who bake batters and frostings more than bread. It is a small fix for a daily annoyance.
Skip it if your Bosch is mainly a bread machine. Dough work is the one place this part does not join in.
Pros and cons
Pros
- Same idea as the KitchenAid beater, for a different mixer
- Includes spare blades
- Easy to store
Cons
- Not for dough hooks
- Cleaning method not stated
- Needs the whip drive
How to choose an attachment for your stand mixer
An attachment is a small purchase that can turn out to be a waste if it does not fit or never leaves the cabinet. These are the questions we would ask, in order.
Find out how your mixer takes attachments
KitchenAid household mixers have a front power hub, and most KitchenAid attachments plug in there. Hamilton Beach describes a power hub on its Professional stand mixer. Bosch works differently. Foodal describes a center driveshaft and a separate side drive on the Universal Plus, and NutriMill’s spiralizer locks onto the mixer bowl. So there is no universal socket across brands, and that word on a listing usually means universal within one family.
Check whether it is a hub part, a bowl part or a beater
Hub parts tend to have the broadest fit. Beaters and bowl-mounted parts depend on the head style, the bowl and sometimes the model number. The Flex Edge Beater is a good example, since it suits only tilt-head mixers of 4.5 and 5 quarts. Bowls work the same way, so keep your model number handy.
Buy for the job you repeat
Think about your own week. If you grate cheese for enchiladas and cabbage for tacos, a slicer earns its place. A monthly fresh pasta night points to our pasta maker guide, and home-ground meat points to our stand mixer meat grinder guide. We left those two jobs out of this page because those guides already cover them.
Read third-party fit claims for what they are
Amazon is full of low-cost parts that claim to fit a KitchenAid. We kept this page to makers we can identify. Even then, the Hamilton Beach set’s KitchenAid fit is Hamilton Beach’s statement. We have no statement from KitchenAid on it. If a warranty on your mixer matters to you, check its terms before you run another maker’s part on it.
Think about washing and storing
The top rack handles NutriMill’s spiralizer and ice cream parts, and KitchenAid’s sheet cutter blades. Other listings say less. A part that is hard to clean or takes up a shelf tends to stop being used. Two attachments you reach for are better than five you forget.
What about Cuisinart and Ankarsrum?
We looked. Cuisinart’s own pasta extruder showed low stock when we checked, and most other parts offered for Cuisinart mixers come from little-known sellers, so no Cuisinart part made this list. Ankarsrum’s in-stock grater on Amazon was the obvious candidate, but Ankarsrum says it requires the Meat Mincer Accessory, and that mincer showed low stock too. If you own either mixer, the maker’s own site is the better place to start.
How we picked these seven stand mixer attachments
We have not used these products ourselves. We read each Amazon listing and confirmed it was in stock with a new lead offer when we wrote this, and we set aside anything shown as low stock. For the Bosch family, we read NutriMill’s own help guides and Foodal’s article on Bosch Universal Plus attachments by Nikki Cervone. We kept to identifiable makers and left out the many low-cost clones. The KitchenAid picks rest on the listings, because KitchenAid’s help pages would not load when we tried. We also checked the Consumer Product Safety Commission’s recall database under KitchenAid, Whirlpool, Bosch, Hamilton Beach and NutriMill, and found no recall naming a stand mixer attachment.
Stand mixer attachment questions, answered
Are KitchenAid attachments worth buying?
The ones you use each week are. A slicer usually pays back the shelf space faster than a specialty tool. Buy one, use it for a month, then decide about the next.
Do attachments fit every stand mixer?
No. KitchenAid hub parts are sold for household KitchenAid mixers, and Bosch parts are sold for Bosch and Artiste mixers. Few listings cross those lines, and the Hamilton Beach set is the only pick here that claims to.
Can a KitchenAid attachment go on a Bosch mixer?
None of the KitchenAid listings on this page name a Bosch mixer. Treat them as separate systems, and look at the NutriMill picks if you own a Bosch.
Which attachment should I buy first?
For most cooks, a slicer and shredder. Bakers may get more from a scraping beater. If you want a job your mixer cannot do yet, the ice cream or spiralizer picks add one.
Do attachments strain the motor?
The listings here do not put a limit on it, so follow the speed guidance in your manual and in the attachment’s guide. NutriMill, for example, names low speeds for soft vegetables and higher speeds for firm ones.
Our final word on mixer attachments
Match the part to your mixer first and your cravings second. If you are still choosing the machine, our best stand mixer guide compares them, and our food processor guide helps if you would rather buy a separate machine for prep. And on nights when you would rather leave the mixer alone, call to order from Julia’s.